If the grass is thick or taller than 15cm (5.9in), manually trim it to 2.5-6.5cm (0.98-2.6in) first. Manually remove unwanted low plants, such as wildflowers. For plants you want to keep, such as ornamental flowers, set the area as a No-Go Zone in the app.
Full Wi-Fi coverage is ideal. If complete coverage is not possible, make sure Wi-Fi reaches both the charging station and the RTK station. This allows the mower to receive OTA updates and share information properly.
On the app homepage, press the "+" button. Then activate Bluetooth by long-pressing the "START" button on the mower for 5 seconds. Select the correct Bluetooth connection for your mower. On the Wi-Fi settings page, select your home Wi-Fi network and enter the password.
Go to the paired mower's Settings menu and select Wi-Fi connection. Long-press the "START" button for 5 seconds to activate the mower. Then select the new Wi-Fi network, enter the password, and confirm.
For first use, after connecting to Wi-Fi, you will automatically go to the binding page. Press Bind to complete pairing. If there is no Wi-Fi, press "No Wi-Fi/Go Online via 4G" and then bind the mower.
Go to the Maps page from the homepage. Click "create a new map" and select the correct Wi-Fi. Make sure the RTK signal is connected and the battery level is above 50%. Then choose the map type and follow the app instructions.
The charging station can be moved before mapping. Do not move it after the map is finished, or the mower may not return or function correctly. If the RTK station is moved after map creation, you must create a new map.
The NovorikX X1 is typically suitable for lawn areas from 800m² to 1500m², or approximately 8611sqft to 16146sqft.
Replace the blades every 240 working hours, or every 1-2 months if used frequently. At minimum, replace them once a year. Replace the screws together with the blades and do not reuse old screws. The app will send a reminder notification when blade replacement is needed.
Yes, but make sure all screws are tightly secured first. Use a regular water hose for cleaning. Do not use a high-pressure washer, as it may damage the mower.
If the grass is thick or taller than 15cm (5.9in), manually trim it to 25–60mm (0.98–2.36in) first. Remove unwanted low plants, such as wildflowers, manually before mowing. For plants you want to keep, such as ornamental flowers, set the area as a No-Go Zone in the app.
Full Wi-Fi coverage is ideal. If complete coverage is not possible, make sure Wi-Fi reaches both the RTK station and the charging station. This allows OTA updates and information sharing. Please note that when binding the RTK station, the mower must be connected to the Internet.
On the app homepage, tap the "+" button in the top right corner. Then activate Bluetooth by long-pressing "START" on the mower for 5 seconds. Select the correct Bluetooth connection for your mower. On the Wi-Fi settings page, select your home Wi-Fi, enter the password, and confirm.
Go to Settings → Wi-Fi connection on the paired mower. Long-press "START" for 5 seconds to activate the mower. Then select the most recent Wi-Fi network, enter the new password, and confirm.
For first use, after connecting to home Wi-Fi, you will automatically go to the binding page. Press "Bind" to complete pairing. If there is no home Wi-Fi, press "No Wi-Fi / Go Online via 4G" and then bind the mower again.
Go to the "Maps" page by clicking the product on the homepage. Choose "Create a new map" and select the correct home Wi-Fi. Pick the map type. Make sure the RTK signal is connected and the battery power is above 50%.
You can move the charging station before mapping. Once the map is finished, both the charging station and RTK station must stay in place. Moving them may prevent the mower from returning and working properly. If you move the RTK station after map creation, you must create a new map.
On the "Maps" page, select the map you want to edit, rename, or delete.
Yes. The mower can pass through narrow pathways wider than 1.2 meters, or approximately 3.94 ft.
The NovorikX X3 is typically suitable for lawn areas from 500m² to 800m², or approximately 5382 to 8611 sq ft.
Refer to Section 3.3 "Install the RTK Station" and choose a correct installation location with open sky and no obstructions.
Go to Settings on the homepage and click "Delete device" to delete or unbind the mower.
Pressing "STOP" puts the mower into stop mode. To restart the mower, press "Start" and "OK" together on the control panel.
You will receive notifications in the app when new software updates are available.
Replace the blades every 240 working hours, or every 1–2 months if used frequently. At minimum, replace them once a year. Replace the screws together with the blades and do not reuse old screws. The app will send a reminder notification when blade replacement is needed.
Yes, but make sure all screws are tightly secured before cleaning. Use a regular water hose for cleaning. Avoid using high-pressure water, as it may damage the mower.
If the grass is thick or taller than 15cm (5.9in), manually trim it to 25-60mm (0.98-2.36in) first. Remove unwanted low plants, such as wildflowers, manually before mowing. For plants you want to keep, such as ornamental flowers, set the area as a No-Go Zone in the app.
Full Wi-Fi coverage is ideal. If complete coverage is not possible, make sure Wi-Fi reaches both the RTK station and the charging station. This allows OTA updates and information sharing. Please note that when binding the RTK station, the machine must be connected to the Internet.
On the app homepage, tap the "+" button in the top right corner. Activate Bluetooth by long-pressing "START" on the mower for 5 seconds. Select the correct Bluetooth connection for your mower. On the Wi-Fi settings page, select your home Wi-Fi, enter the password, and confirm.
Go to Settings > Wi-Fi connection on the paired mower. Long-press "START" for 5 seconds to activate the mower. Select the most recent Wi-Fi network, enter the new password, and confirm.
For first use, after connecting to home Wi-Fi, you will automatically go to the binding page. Press "Bind" to complete pairing. If there is no home Wi-Fi, press "No Wi-Fi / Go Online via 4G" and then bind the mower again.
Go to the "Maps" page by clicking the product on the homepage. Choose "Create a new map" and select the correct home Wi-Fi. Pick the map type. Make sure the RTK signal is connected and the battery power is above 50%.
You can move the charging station before mapping. Once the map is finished, both the charging station and RTK station must stay in place. Moving them may prevent the mower from returning and working properly. If you move the RTK station after map creation, you must create a new map.
On the "Maps" page, select the map you want to edit, rename, or delete.
Yes. The mower can pass through narrow pathways wider than 1.2 meters, or approximately 3.94 ft.
The NovorikX X3 is typically suitable for lawn areas from 800m² to 1200m², or approximately 8611 to 12917 sq ft.
Refer to Section 3.3 "Install the RTK Station" and choose a correct installation location with open sky and no obstructions.
Go to Settings on the homepage and click "Delete device" to delete or unbind the mower.
Pressing "STOP" puts the mower into stop mode. To restart, press "Start" and "OK" together on the control panel.
You will receive notifications in the app when new software updates are available.
Replace the blades every 240 working hours, or every 1-2 months if used frequently. At minimum, replace them once a year. Replace the screws together with the blades and do not reuse old screws. The app will send a reminder notification when blade replacement is needed.
Yes, but make sure all screws are tightly secured before cleaning. Use a regular water hose for cleaning. Avoid using high-pressure water, as it may damage the mower.