The NovorikX gas powered chainsaw is equipped with a 42cc 2.3HP 2-cycle engine, providing high cutting efficiency and powerful performance for demanding outdoor tasks.

The chainsaw comes with:

• 1× 18-inch chain plate and chain
• 1× 16-inch chain plate and chain

The chains are designed for optimal cutting efficiency with reduced kickback.

This chainsaw uses a 50:1 fuel mixture ratio (unleaded gasoline to 2-cycle oil).To prepare the correct mixture:

• Mix 2.6 fluid ounces of 2-cycle oil with 1 gallon of unleaded gasoline in an approved container.
• Shake the mixture well before fueling the chainsaw.

Important: Using an incorrect fuel mixture may cause engine damage and void the warranty.

On average, one full tank of fuel allows you to cut down up to 55 trees (30 inches in diameter each) under optimal conditions.

The chainsaw features an automatic oil supply system that continuously lubricates the chain and bar, reducing wear and overheating.You can manually adjust the oil flow with the oil adjustment screw:

• Turn counterclockwise to increase oil flow.
• Turn clockwise to decrease oil flow.

Ensure the oil tank is filled before each use to prevent chain damage.

After each use:

• Clean the guide bar and chain to remove debris.
• Check chain tension and adjust if necessary.
• Ensure the air filter and spark plug are clean.

For long-term storage (over 20 days):

• Drain fuel completely and let the engine run until it stalls.
• Add 2-stroke oil into the spark plug hole and pull the starter handle slowly to distribute oil.
• Store in a dry, cool place, away from flammable materials.